logo

Category

Carbon steel
EN9 forged carbon steel round bar

EN9 Carbon Steel |070M55 BS970 Standard

EN9 Carbon steel is a medium carbon steel with  0.5-0.6% C as per BS 970 standard.It is also known as 070M55 with tensile strength between 500-800Mpa.EN9 steel is generally supplied  in untreated condition or in the normalized condition.This material can be flame or induction hardened to produce a high surface hardness with excellent wear resistance .When hardened and tempered, it develops a tensile strength in the r
Read More
EN8 Forged carbon steel round bar

BS970 EN8 Carbon steel | 080M40

EN8 Carbon steel is a medium carbon steel with  0.36-0.44% C as per BS 970 standard. It has moderate tensile strength between 500-800Mpa.It is generally supplied in untreated condition or in the normalized condition.EN8 can be hardened by quenching and tempering on limited sections,and also can be flame or induction hardened to produce a good surface hardness(50-55HRC) with moderate wear resistance.EN8 steel can be e
Read More
C40 steel

C40|DIN 1.0511|AISI 1040|S40C

C40 carbon steel has high carbon content and can be hardened by heat treatment followed by quenching and tempering to achieve 150 to 250 ksi tensile strength.it is usually supplied as forged or normalized condition.C40 carbon steel can be welded using all welding techniques with the correct procedure,and it  has good machinability(rate at 60) after full annealing.it also can be hardened by flame or induction hardenin
Read More
C35 steel

C35|DIN 1.0501|AISI 1035|S35C

C35 steel is a medium carbon, medium tensile steel supplied as-forged or normalized condition.This steel shows excellent forgeability, reasonable strength, toughness and wear resistance. C35 is easily welded with the correct procedure.Due to the carbon content preheating and postheating are required.It has good Machinability after full annealing.Wide range of mechanical properties can be attained by quenching and tem
Read More
AISI 1020 forged round bar

AISI 1020|1.0402|C22|S20C

AISI 1020 steel is a low carbon steel which has at least 0.17%C and 0.3%Mn. It has a good combination of strength and ductility and can be carburized,but due to its low carbon content, it is difficult to induction hardening or flame hardening. Due to lack of alloying elements, it is not suitable for nitriding.AISI 1020 steel can be easily machined,and can be welded easily using all of the traditional methods. 1.AISI
Read More
AISI 1045 forged round bar

AISI 1045|1.1191|C45E|S45C

AISI 1045 steel is a medium tensile steel supplied as forged or normalized condition. It has a tensile strength of 570 – 700 MPa and Brinell hardness range 170 to 210HB.AISI 1045 steel offers good strength, toughness,wear resistance and impact properties in either the normalized or hot rolled condition.AISI 1045 steel has a low through-hardening capability with only sections of size around 60 mm being recommend
Read More