logo

Category

Alloy steel
SACM645 FORGED ROUND BAR

SACM645-JIS Nitriding Steel | 41CrAlMo7 | EN41B

SACM645 steel  is defined as Cr-M0-Al Nitriding steel as per JIS G4053 Standard.It has excellent wear resistance,high surface hardness and  fatigue strength after nitriding.This material is generally supplied in annealed condition.SACM645 is usually used for high precision machine parts,typical use are  cylinder lining, compressor parts,and hydraulic parts. 1.Chemical Composition 2.Related Specifications BS:EN41B DIN
Read More
50CRMO4 Forged shaft

50CrMo4|DIN1.7228|AISI 4150

50CrMo4 is a higher carbon variation of the chromium, manganese, molybdenum 4100 series of low alloy steels.It has high strength,toughness,and high hardenability,and also has good machinability in annealed or normalized conditions.50CrMo4 can be welded using all conventional techniques. The mechanical properties of this steel can be affected if it is welded in the hardened condition. Post-weld heat treatment should b
Read More
34CrNiMo6 steel bar

DIN 1.6582|34CrNiMo6

DIN1.6582/34CrNiMo6 steel is a heat treatable, low alloy steel,used for a wide range of engineering parts. It is capable of being heat treated to produce a typical tensile strength of 1000 -1200 N/mm² which combined with good ductility and resistance to shock. It also has good hardenability,enabling it to be used for medium tensile strengths in fairly large sections, and attain good wear resistance,good impact proper
Read More
1.7225 forged flat bar

DIN 1.7225|42CrMo4

42CrMo4 is alloyed heat treatable steel which is used in quenched and tempered condition with a typical tensile strength of 900 -1200 N/mm².It has high strength,good wear-resistance,high fatigue strength and good low-temperature impact toughness.Similar to AISI 4140,SCM440,only a little different in Mn,Cr,this material also has good machinability,but poor in weldability. 1.42CrMo4 steel Supply Form & Size 2.Surfa
Read More
AISI 9840 Steel bar

AISI9840|36CrNiMo4|1.6511|39NiCrMo3

 AISI 9840 is a nickel-chrome-molybdenum steel  which contains at least 0.85%Ni,0.7%Cr,0.2%Mo as strengthening alloy elements.It is suitable for different heat treatment and shows excellent hardenability, strength,toughness and good cold workability.After annealing,this material  becomes machinable and adjusted for the mechanical cutting.pre-heat and post-weld stress relief are necessary for welding of this alloy,but
Read More
AISI 8620 hot rolled bar

AISI 8620|1.6523|20NiCrMo2-2

AISI 8620 is a case-hardening steel which has at least 0.4% Cr, 0.15% Mo and 0.4% Ni as strengthening alloy elements.Compared with grades 8615 and 8617,it offers good core strength and toughness in small to medium sections with case hardness up to Rc62 when carburized, hardened and tempered.AISI 8620 is generally supplied as annealed condition with HB 255max.Pre hardened and tempered (uncarburized) 8620 can be furthe
Read More
AISI 4130 Forged round bar

AISI4130|1.7218|25CrMo4|SCM430

AISI 4130 is a low alloy steel which contains nominally at least 0.28% Carbon, 0.8% Chromium and 0.15% Molybdenum as strengthening agents. It has good strength ,toughness,fatigue strength,and good atmospheric corrosion resistance.Similar to 4140, it has a lower carbon level which gives 4130 improved weldability, at the expense of through thickness strength.AISI 4130 steel is usually used in the quenched and tempered
Read More
AISI 4140 Round bar

AISI4140|42CrMo4|SCM440|EN19

AISI 4140 steel is Chrome-Moly High Tensile Steel which has at least 0.8%Cr,0.15%Mo as strengthening alloy elements.The chromium content provides good hardness penetration, and the molybdenum content ensures uniform hardness and high strength. AISI 4140 steel can be oil hardened to a relatively high level of hardness with a tensile strength of 850 – 1000 MPa.AISI 4140 offers a very good balance of strength,toughness
Read More
AISI 4340 steel round bar

AISI4340|EN24|40NiCrMo6|SNCM439

AISI 4340 steel is a low alloy steel which contains at least 0.7 Cr%, 1.65 Ni%, and 0.2% Mo as strengthening alloy elements as per ASTM A29.As a heat treatable steel,AISI 4340 has a very good balance of strength, toughness and wear-resistance,and can attain high strength while retaining good fatigue strength which makes it ideal for all highly stressed parts in the most severe conditions.It may be used in both high a
Read More